Becker Series V-0 Control Valve
This is an external product.
显示所有 12 结果
-
-
Cameron T30 Series ball valve.
Applications- Isolation valve for aboveground and buried pipeline installations
- Long-term gas storage facilities
- Compressor, gathering, and metering stations
- Gas terminals
- Residential gas installations
- Onshore and offshore production and gas and LNG processing
- Subsea isolation
- Measurement skids
- Oil and gas dehydration systems
- Hydrogen, CCUS, renewable fuels, and ammonia service
-
Consolidated Type 2700 Safety Valve
Thermodisc thin flexible design for repeatable seat tightness.
-
Consolidated Type 3500 Electromatic™ Ball Valve
New digital controller interfaces with modern distributed control systems or DCS
-
INDUSTRY Typ 06810, Typ 06815 – O-Ring
Hydrogen is likely to be produced at locations with abundant renewable electricity, making liquefaction a viable option for transport. HEROSE supplies cryogenic globe valves, check valves and filters for liquefaction, storage and transport by ship and trailer.
At the destination, where hydrogen is regasified, the FullX globe valve can be deployed at liquid hydrogen temperature but also for gaseous hydrogen at 63 bar pressure.
Our cryogenic safety valves can even be used up to 1200 bar pressure for subsequent compression to transport the hydogen via pipeline or trailer or for underground storage.
-
INNOMAG® TB-MAG™ Dual Drive™内衬含氟聚合物、磁力驱动 ISO/ASME (ANSI) 化工流程泵
- 允许使用标准的、随时可获取的、现成的客户自选电机
- 电机不与液体接触。实际上，一级和二级安全壳阻隔层采用相同材质，以确保化学兼容性。
- 维护极少 —— 仅需一套轴承
- 零涡流损耗，效率更高
- 一级安全壳失效后，也无需电工来维修泵
- 可处理体积达30%的固体
- 简单易用，无需专用工具即可维修
-
IWAKI METERING PUMP 直驱隔膜式定量泵 LKLK-F
LK系列的驱动部分采用双偏心凸轮系统，内置高可靠性的铜铝合金材质的涡轮减速装置，结构紧凑、坚固耐用。过流端材质组合多达七个，能够应对不同的工况需求。
易威奇在化学药液添加的泵技术领域具有丰富的经验及实力，其产品的质量、性能、操作性及经济性均具有优势。
LK系列特别适用于包括水处理、化工、纺织、造纸、食品加工及医药生产等范围内的化学药液添加工艺。 -
KSB 膜片阀SISTO-C
膜片阀带焊接端或夹具，直通形、Y 形、T 形或作为多座阀，通过一个带腔室的和支撑式膜片进行通道密封和对外密封，无死角、可消毒，适用于 CIP 和 SIP 的设计，位置指示器，所有功能部件位于工作介质以外，免维护。
-
NSK 特殊工况专用轴承SPACEA™系列 耐腐蚀轴承
耐腐蚀轴承，备有适于“多水”、“弱酸或碱性”、“强酸或活性气体”等不同工况的各种产品。
“多水工况”专用轴承产品有：不锈钢轴承、混合型轴承、自润滑（Lubricated）轴承、耐蚀镀膜轴承；“弱酸或碱性工况”专用轴承产品有：陶瓷轴承、ESZ轴承；“强酸或活性气体工况”专用轴承产品有：陶瓷轴承、防水轴承。
此外，还有为实现零发尘量的特殊系列用清洁轴承。使用独自研发的技术，在大气、真空等高温环境下发挥效果。 -
Parker C15微型插装式电磁阀
C15是C系列插装式阀中直径为15 mm的中型阀(门)。有两通和三通常闭配置。这种快速稳定的阀是生命科学应用的理想选择。
流速: Up to 55 SLPM SLPM 最大流速: Up to 55 SLPM 最大运行压力: Up to 145 psi, 10 bar 孔口尺寸: 0.5, 1.0, 1.5, 2.0 mm 最高运行温度: 122 °F, 50 °C 最低运行温度: 32 °F, 0 °C 功能: 2-Way, 3-Way, Normally Closed (NC) 端口连接: Cartridge Style 周期数/生命期: 500 Million, 200 Million 启动类型: Solenoid 运行类型: Electronic 控制方法: Hit and Hold, Voltage 功耗: 1.1 Watts Typical, 1.7 Watts Typical, 1.6 Watts Typical W 电气连接: 3.2 in (80 mm) Flying Leads 主体和阀杆底座材料: Stainless Steel Series 300 and 400 高度: 1.142 inch, 29 mm 宽度: 0.591 inch, 15 mm 重量: 0.78 oz, 22.11 g 与流体类型共同使用: Gases 行业应用: Portable/Transport Ventilators, Negative Pressure Wound Therapy, Air Over Liquid Dispense, Sidestream CO2 measurement, Portable/Hand held environmental monitoring 配置: N/A 安装类型: Manifold -
SKF 6000-2RSLTN9/HC5C3WT
Hybrid ceramic single row deep groove ball bearings with low-friction seals on both sides have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. The low-friction seals provide better sealing effectiveness than shields and non-contact seals, thus providing significantly prolonged bearing service life, yet they can still operate at the same speeds as shields. The ceramic rolling elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false brinelling and less sensitivity to temperature gradients, making them suitable for use in difficult conditions and contaminated environments.
- 防止轴承受到过电流损坏；特别适合用于恶劣条件和污染环境；单列深沟球轴承的典型优势
-
针形阀和计量阀 — 高压针阀
针形阀和计量阀 — 高压针阀，Sno-Trik 410、445、645、945 系列 — 直通型
冷加工 316 不锈钢阀体和高压端接可承受高达 45000 psig (3102 bar) 的工作压力。